Manufacturer of to Philippines Manufacturer

Short Description:

Product Detail

Product Tags

Our business promises all users of the first-class items and the most satisfying post-sale company. We warmly welcome our regular and new prospects to join us for Hot Hands , Hand Warmers Temperature , Christmas Hot Water Bottle , Welcomes all abroad close friends and retailers to ascertain collaboration with us. We are going to give you with genuine, high-quality and successful company to satisfy your requirements.
Manufacturer of to Philippines Manufacturer Detail:

Product detail pictures:

We support our purchasers with ideal premium quality products and substantial level company. Becoming the specialist manufacturer in this sector, we've acquired rich practical working experience in producing and managing for Manufacturer of to Philippines Manufacturer, The product will supply to all over the world, such as: Turin , Doha , Casablanca , Furthermore, all of our products are manufactured with advanced equipment and strict QC procedures in order to ensure high quality. If you are interested in any of our products, please don't hesitate to contact us. We will do our best to meet your needs.

  • ★★ Cheap Price S’well Exotics 17oz Water Bottle in Sand Python | REVOLVE ★★

    Check Price Click :
    Go To Store Click :
    Special Price Click :

    Insulated 17 oz stainless steel water bottleTwist-off topThermaS’well technology keeps liquids cold for 24 hours and hot for 12 hoursRevolve Style No. SWER-WA2Manufacturer Style No. LESP 17 B15

    In this video, West Harris shows us how to install an Elkay drinking fountain as well as the accompanying EZH20 water bottle filler. Each EZH20 water bottle filler is capable of preventing thousands of water bottles from ending up in landfills each year.

    Video Transcript:

    “Today we’re going to show you how to install an Elkay drinking fountain With an EZH2O water bottle filling station. The EZH2O can help save you time and money and is good for the environment as well. This simple and convenient way to refill reusable water bottles, helps prevent thousands of plastic water bottles from entering landfills each year. An EZH2O can also fill a water bottle up to 3 times faster than a drinking fountain alone.

    Before we begin installing we will need to make sure we have the right tools for the job. You will need some 2 to 3 inch screws, some wall anchors, a screw driver or an electric drill, and a level.
    Although not shown in this video you will need a water supply line run to a location near a drain pipe, and a G.F.C.I. outlet to connect your Elkay drinking fountain to. Each of these elements are require and you will need to have all three of these things installed before you begin installation of your drinking fountain.

    After opening the box containing your Elkay drinking fountain the first thing you will need to do is remove the mounting bracket that is attached to the back of your drinking fountain. Once the mounting bracket has been removed, use your level to mark the desired height of your mounting bracket as well as the location of your screw holes.

    Now it is time to install your wall anchors. There are many different types of anchors available and you may need to use a different variety of anchor than what we use in this video depending on the type of wall you are mounting your fountain to. It is preferred that you mount directly to your wall studs if you can. It makes for a more stable installation, but using the proper anchors can be affective as well.

    In most new installations the plumbing for your drinking fountain will be located higher up on the wall and will enter through the back of the drinking fountain. Because our hookups are located below our drinking fountain we had to cut an opening in the bottom of the drinking fountain housing to facilitate the alternate location of the plumbing.

    Once the drinking fountain has been mounted we can then begin installing our “P” trap as well as our incoming water line. There is not a lot of room inside of the housing, so you may need to get creative in order to fit it all inside. Keep in mind that we have yet to install the filter, which takes up a lot of room as well.

    The EZH20 bracket is the next component that we will install. To mount this we will add three screws to the top of the bracket and three to the bottom. When the bracket is in place we can then thread the power cord and water supply line of the EZH20 through the body of the drinking fountain. There are two hex screws on the top of the EZH20 that will secure the station to the bracket.

    The water supply line will connect to the three-way John Guest fitting that is inside of the body of the drinking fountain.
    In the next step we’ll be installing the water filter. It’s a tight fit, but if you installed your drain pipe correctly it should fit in without any problems. Once it is in position you are ready to attach the outer housing to your drinking fountain.

    The housing can be secured in place with screws that are inserted into the bottom of the housing. Now just plug in your drinking fountain and your EZH20 water bottle filler and you are ready to go.

    If this video was helpful then please be sure to hit the like button. For more videos like this one, be sure to subscribe to our channel and as always, thanks for watching!”

    Related Products

    WhatsApp Online Chat !