New Arrival China recharged hot water bag Supply to Melbourne
Place of Origin:Zhejiang, China (Mainland) Brand Name:NUANYI Model Number:NY0077 classification:hand warmer stlye:with cover (can put hand in bag) Product name:electric hot water bag Item name:electric warm bag weight:1.4kg Style:custom size:26*18.5cm Material: Flannelette,PVC Voltage:220V(110v) Power:380w Charge time:8-15min Warm time:3-8 hours Manufactor: Cixi Jade Rabbit Electric Appliance Factory Approved Certificate:CE ROHS Wire length:75(80)cm Max...
New Arrival China recharged hot water bag Supply to Melbourne Detail:
|Place of Origin:Zhejiang, China (Mainland)|
|stlye:with cover (can put hand in bag)|
|Product name:electric hot water bag|
|Item name:electric warm bag|
|Warm time:3-8 hours|
|Manufactor: Cixi Jade Rabbit Electric Appliance Factory|
|Approved Certificate:CE ROHS|
Product detail pictures:
Persisting in "High high quality, Prompt Delivery, Aggressive Price", we've established long-term cooperation with clients from the two overseas and domestically and get new and old clients' superior comments for New Arrival China recharged hot water bag Supply to Melbourne, The product will supply to all over the world, such as: Russia , Riyadh , Casablanca , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
The high-voltage module uses the principle Tesla coil is made of high-voltage pulse output voltage
current, small size , high efficiency, simple external circuit ( just plug in the switch , the battery can be )
discharge intensity violent.
Voltage: Input DC3.6-6V, output DC700KV( Please note that when security )
High Type : Pulse Current
High voltage bipolar discharge distance : 10mm-20mm
Output voltage lines Length: about 100mm
Input power cable length: about 10mm ( red is positive )
Dimensions : Φ27 * 68mm
About Power :
3.7V Li-ion battery can be used single or two series , such as 18650 , idle cell phone batteries ( to remove the protection board , the proposed capacity of 2000mAh or more ) or NiCd / NiMH battery pack , 4V or 6V Lead Acid batteries.
This module is a small production with high-pressure science inverter transformer / booster finished module , the input terminal DC3V-7.2V voltage can get 200,000 volts DC high voltage ( about 1-2 cm arc ) at the output can be used as high school science experiments , electronic equipment, negative ion generator, high voltage source to use when making small science .
Avoid high-pressure high-voltage module load electricity use . Must adjust the high voltage side suitable distance ( before electricity, battery voltage and capacity is proportional to the distance from high-voltage arcing used when testing the arc distance from short to long experiment , prohibited from beyond the arc when powered up , the energy can not be released due to high pressure , easily damage the module. )
Due to power, the internal heat is not easy , every power-on time should be controlled within a minute.
Determine whether the battery capacity can be driven approach is the maximum power output of the battery when the voltage measurement arcing . If so you can 6V maximum power output .
Two sections of small capacity lithium series of 7.2V, measured arc voltage has dropped to about 4V state , the capacity of the smaller voltage pulled lower. It is recommended to use more than one lithium battery 2000mA , 4000mA best conditions with more battery .
Commonly used in 105 high-voltage generator, high voltage ignition, teaching experiments