Top Suppliers recharged hot water bag for Ethiopia Manufacturer
Place of Origin:Zhejiang, China (Mainland) Brand Name:NUANYI Model Number:NY0078 classification:hand warmer stlye:with cover (can put hand in bag) Product name:electric hot water bag Item name:electric warm bag weight:1.4kg Style:custom size:27*19.5cm Material: Flannelette,PVC Voltage:220V(110v) Power:380w Charge time:8-15min Warm time:3-8 hours Manufactor: Cixi Jade Rabbit Electric Appliance Factory Approved Certificate:CE ROHS Wire length:75(80)cm Max...
Top Suppliers recharged hot water bag for Ethiopia Manufacturer Detail:
|Place of Origin:Zhejiang, China (Mainland)|
|stlye:with cover (can put hand in bag)|
|Product name:electric hot water bag|
|Item name:electric warm bag|
|Warm time:3-8 hours|
|Manufactor: Cixi Jade Rabbit Electric Appliance Factory|
|Approved Certificate:CE ROHS|
Product detail pictures:
We also provide item sourcing and flight consolidation solutions. We have now our very own manufacturing facility and sourcing place of work. We could provide you with nearly every kind of merchandise associated to our merchandise variety for Top Suppliers recharged hot water bag for Ethiopia Manufacturer, The product will supply to all over the world, such as: Barcelona , Greek , Netherlands , Due to our strict pursues in quality, and after-sale service, our product gets more and more popular around the world. Many clients came to visit our factory and place orders. And there are also many foreign friends who came for sight seeing, or entrust us to buy other stuff for them. You are most welcome to come to China, to our city and to our factory!
In this video, West Harris shows us how to install an Elkay drinking fountain as well as the accompanying EZH20 water bottle filler. Each EZH20 water bottle filler is capable of preventing thousands of water bottles from ending up in landfills each year.
“Today we’re going to show you how to install an Elkay drinking fountain With an EZH2O water bottle filling station. The EZH2O can help save you time and money and is good for the environment as well. This simple and convenient way to refill reusable water bottles, helps prevent thousands of plastic water bottles from entering landfills each year. An EZH2O can also fill a water bottle up to 3 times faster than a drinking fountain alone.
Before we begin installing we will need to make sure we have the right tools for the job. You will need some 2 to 3 inch screws, some wall anchors, a screw driver or an electric drill, and a level.
Although not shown in this video you will need a water supply line run to a location near a drain pipe, and a G.F.C.I. outlet to connect your Elkay drinking fountain to. Each of these elements are require and you will need to have all three of these things installed before you begin installation of your drinking fountain.
After opening the box containing your Elkay drinking fountain the first thing you will need to do is remove the mounting bracket that is attached to the back of your drinking fountain. Once the mounting bracket has been removed, use your level to mark the desired height of your mounting bracket as well as the location of your screw holes.
Now it is time to install your wall anchors. There are many different types of anchors available and you may need to use a different variety of anchor than what we use in this video depending on the type of wall you are mounting your fountain to. It is preferred that you mount directly to your wall studs if you can. It makes for a more stable installation, but using the proper anchors can be affective as well.
In most new installations the plumbing for your drinking fountain will be located higher up on the wall and will enter through the back of the drinking fountain. Because our hookups are located below our drinking fountain we had to cut an opening in the bottom of the drinking fountain housing to facilitate the alternate location of the plumbing.
Once the drinking fountain has been mounted we can then begin installing our “P” trap as well as our incoming water line. There is not a lot of room inside of the housing, so you may need to get creative in order to fit it all inside. Keep in mind that we have yet to install the filter, which takes up a lot of room as well.
The EZH20 bracket is the next component that we will install. To mount this we will add three screws to the top of the bracket and three to the bottom. When the bracket is in place we can then thread the power cord and water supply line of the EZH20 through the body of the drinking fountain. There are two hex screws on the top of the EZH20 that will secure the station to the bracket.
The water supply line will connect to the three-way John Guest fitting that is inside of the body of the drinking fountain.
In the next step we’ll be installing the water filter. It’s a tight fit, but if you installed your drain pipe correctly it should fit in without any problems. Once it is in position you are ready to attach the outer housing to your drinking fountain.
The housing can be secured in place with screws that are inserted into the bottom of the housing. Now just plug in your drinking fountain and your EZH20 water bottle filler and you are ready to go.
If this video was helpful then please be sure to hit the like button. For more videos like this one, be sure to subscribe to our channel and as always, thanks for watching!”
This video shows you how to make a hot water bottle cover in-the-hoop on your embroidery machine. The cover will fit small 1 liter water bottles (not the large ones). They are entirely made in the hoop on your embroidery machine, no additional sewing is required. This and other embroidery designs are available in my online shop www.smart-dsign.com
Dieses Video zeigt Ihnen, wie Sie Hüllen für 1-Liter-Wärmflaschen in-the-hoop auf Ihrer Stickmaschine herstellen können. Zusätzliche Näharbeiten sind nicht erforderlich. Diese und andere Stickdateien sind in meinem Online-Shop www.smart-dsign.com erhältlich.